Ndroid Printer Failed to Change the Seetings Try Again
| Message | Cause | Solution and reference |
|---|---|---|
| "Address Book is currently in apply by another function. Authentication has failed." | The address book is in utilise by another function, and authentication query is not possible. | Endeavour again later. |
| "A function which cannot be used with Fold mode was set. The job has been cancelled." | A setting that cannot be specified with folding was specified, and printing was canceled. | Check the setting, and abolish the function that cannot be specified with the fold office. |
| "A job via the network that was not printed exists considering an error occurred. It was stored equally a task not printed." | When the mistake job storing function is enabled, an error occurred in the print chore sent via the network and the canceled job was stored. |
|
| "All the remaining print volume has been allocated to another fundamental managed client(s). The job has been cancelled." | The job was canceled because the usage count information could not be obtained from the Central Management machine. | All job slots are occupied past other devices. Check the status of the client car. |
| "An mistake occurred while printing a job with Background Numbering. The job has been cancelled." | A size that is incommunicable to print was specified. | Specify a size smaller than 316.0 mm (12.5 inches) wide and 432 mm (17.1 inches) long in "Print On:" in the printer driver. When [Same as Original Size] is specified in "Print On:", reduce the size specified in "Print On:" or accommodate the size in the application. |
| "An error occurred while processing an Unauthorized Copy Prevention job. The job was cancelled." | The settings in the printer driver are incorrect. | Check the post-obit in the printer driver:
|
| Unauthorized copy prevention is given priority. | Consult the device administrator for the settings of the machine. The machine administrator can modify the setting in [Unauthorized Copy Prevention Printing: Printer].
| |
| "Auto-registration of user data has failed." | The maximum number of items that can exist registered has been exceeded and the hallmark information for LDAP hallmark or Windows hallmark cannot be registered automatically. | Delete a user that is no longer necessary from the address volume. |
| "Booklet/Half Fold is non available with the settings. The job has been cancelled." | A setting in which Booklet or Half-fold cannot exist performed was specified, and printing was canceled. | Check the setting for the availability of the Booklet or One-half-fold role. Listing of Specifications |
| "Cannot access the Retentivity Storage Device." | An SD card or USB flash retentiveness device is unavailable for utilise. |
|
| "Cannot store data of this size." | The paper size is too large. | Reduce the paper size of the document to send. The certificate to send cannot be stored at a custom size. |
| "Cannot transfer image logs and task logs to the server. If this continues then some functions will be restricted. Contact the administrator to cheque the status of the server." | A transfer error of paradigm logs and task logs has occurred. | Contact your auto administrator. Machine administrator should check the status of the epitome logs and job logs collection server. |
| "Cannot transfer image logs and job logs to the server. Some functions are being restricted. Contact the administrator to bank check the condition of the server." | The bachelor functions were restricted due to a transfer error of the image logs and chore logs that caused the maximum numbers of stored image logs and job logs to be exceeded. | |
| "Classification Code is wrong." | A nomenclature code is not specified. | Consult the auto ambassador for the classification code, and enter the lawmaking in "Classification Lawmaking" on the [Detailed Settings] tab |
| The document was printed in a printer driver that does not support the nomenclature code. | Request the machine administrator to change the setting of the nomenclature code. Auto administrator: Change the [Classification Code] to [Optional] in Spider web Image Monitor if necessary. Managing the Number of Printed Sheets Using the Classification Lawmaking | |
| "Collate has been cancelled." | The sort function was canceled. | Plow off the power of the motorcar, wait for 10 seconds or more later confirming that the main power indicator is turned off, and and so plough on the ability. Turning On and Off the Power |
| "Command Mistake" | A problem occurred in the data because of the communication status or another reason. | Check that the machine can communicate with the figurer properly. |
| A printer driver that does non support the automobile was used. | Employ the printer driver for the machine. Obtain and install the latest version of the driver. | |
| "Advice fault with central management server has occurred. The chore has been cancelled." | The job was canceled considering a Cardinal Direction communication error occurred. | Check the condition of the Central Direction automobile. |
| "Compressed Information Error." | Compressed data is corrupted. |
|
| "Connection with the auto has failed. Bank check the auto construction." | The machine is malfunctioning, and [Printer] cannot be used. |
|
| "Data storage error." | Printing a document as Test Print, Locked Print, Hold Impress, Shop Print, or storing the document in Document Server failed. The hard disk drive is malfunctioning. | If the message persists fifty-fifty after you accept turned the power off and and then on, consider repairing the motorcar. |
| "Document Server is non available to use. Cannot store." | Apply of the Certificate Server function is restricted. | Consult the user administrator. |
| "Duplex has been cancelled." | The paper source tray is not specified for duplex press. | Specify to apply the paper tray for duplex printing in the following setting items.
|
| "Mistake has occurred." | An fault such equally a syntactic mistake has occurred. | Check that the PDF file to print does not have an error. |
| "Fault occurred in the Folding Unit. The job has been cancelled." | A malfunction occurred in the fold unit. | Consider repairing the motorcar. |
| "Error occurred while processing a Compulsory Security Stamp print job. The job was cancelled." | The job was canceled because an mistake occurred while applying Compulsory Security Stamp. | When feeding paper from the bypass tray, specify the correct paper size and exercise not enable [Motorcar Detect]. |
| "Exceeded max. chapters of Document Server. Cannot store." | The hd is nigh full. |
|
| "Exceeded max. number of files. (Auto)" | The maximum number of Shop Print jobs or the maximum number of jobs that can be managed for Hold Print (Machine) documents has been exceeded while storing a document printed by Normal Impress as a Hold Print job by the fault job storing function. | Erase a Hold Print (Auto) document that is no longer needed. Deleting Documents Stored in the Automobile |
| "Exceeded max. number of files of Document Server. Cannot store." | The number of documents stored in the automobile exceeds the maximum number. | Erase documents that are no longer needed. Deleting Documents from Certificate Server |
| "Exceeded max. number of pages. (Car)" | An "exceeded max. number of pages" error occurred while storing a document printed by Normal Print as a Hold Print chore by the error task storing function. |
|
| "Exceeded max. number of pages of Certificate Server. Cannot shop." | The number of pages stored in the machine exceeds the maximum number. |
|
| "Exceeded max. pages. Collate is incomplete." | The maximum number of sheets that tin be sorted has been exceeded. | Reduce the number of pages to print. |
| "Exceeded the maximum number of multi-sheet fold (Half Fold)." | The number of sheets that tin can be folded in one-half was exceeded, and press was canceled. | Check the number of sheets that can be folded in half on the finisher in use. List of Specifications |
| "Exceeded the maximum unit count for Print Volume Use. The job has been cancelled." | When the print volume is limited, press was canceled considering the print volume of a user exceeded the upper limit allotted for the user. | For details virtually the impress book use limitation, consult the user administrator. The user administrator tin can articulate the counter or change the limit on the print volume. Checking the Counter of the Car for Each Color Category
|
| "Exceeds the maximum number of image logs which tin be stored. Contact the administrator to check the condition of the server." | The image logs cannot exist stored due to a transfer mistake of the image logs and job logs that caused the maximum numbers of stored image logs and job logs to be exceeded. | Contact your motorcar administrator. Machine administrator should bank check the condition of the paradigm logs collection server. |
| "Exceeds the maximum number of job logs which tin can be stored. Contact the administrator to check the status of the server." | The job logs cannot be stored due to a transfer error of the task logs that caused the maximum number of stored task logs to be exceeded. | Contact your automobile administrator. Automobile administrator should check the job logs collection server. |
| "File organisation is full." | The file system is full, and the PDF file cannot be printed. | Erase documents that are no longer needed. Deleting Documents Stored in the Machine Deleting Documents from Document Server |
| "Fold is not available with the settings. The job has been cancelled." | A setting in which folding cannot be performed was specified, and printing was canceled. | Check the tray, paper size, paper type settings and the specified position for post-processing. |
| "Hardware Trouble: HDD" | An error is occurring on the hard disk of the machine. | Turn off the power of the automobile, look for 10 seconds or more after confirming that the main power indicator is turned off, and so turn on the power. Turning On and Off the Ability If the message persists even later on you take turned the power off and and so on, consider repairing the machine. |
| "Hardware Problem: USB" | An error has occurred on the USB interface. | |
| "Hardware Trouble: Ethernet" | An error has occurred in the Ethernet interface. | |
| "Hardware Problem: Wireless Card" | An fault has occurred in the Wireless LAN board. | Turn off the power of the machine, check that the Wireless LAN board is correctly installed in the machine, and so turn on the power. Turning On and Off the Ability If the message persists even after you have turned the ability off and so on, consider repairing the motorcar. |
| "HDD is full." | The surface area reserved for forms or fonts in PostScript 3 is full. | Delete a registered form or font that is no longer necessary. |
| "HDD is full. (Machine)" | An overflow mistake occurred in the hard disk while storing a document printed by Normal Print as a Hold Print job by the error job storing function. |
|
| "I/O buffer overflow." | An overflow has occurred in the receive buffer. |
|
| "Information for user hallmark is already registered for another user." | In LDAP authentication, the same name is registered nether unlike IDs on different servers, and duplicate names (account names) occurred such as when switching the domain (server). | Consult the user administrator. User ambassador: Delete the corresponding user from the address book, and annals the user again after resolving the duplicate names on different servers. |
| "Insufficient Memory" | The amount of bachelor memory is bereft. | Decrease [Resolution] in the printer driver. Applying Different Print Settings Depending on the Certificate Type |
| "Load following paper in XXX. To force print, select another tray and press [Proceed]." (XXX indicates the tray name) | The paper tray specified in the printer driver has no newspaper loaded. |
|
| "Memory Overflow" | The bereft retention error has occurred while press from the printer driver (PCL 6). | In the printer commuter, alter "Vector/Raster" to [Raster] in the [Detailed Settings] tab |
| "Memory Retrieval Error" | The data in the memory could not be retrieved. | Turn off the power of the machine, await for 10 seconds or more later confirming that the main power indicator is turned off, and so turn on the power. Turning On and Off the Power |
| "No response from the server. Authentication has failed." | In LDAP or Windows hallmark, a timeout error occurred while submitting an authentication query to the server. |
|
| "Output tray has been changed." | The destination to evangelize the output newspaper was changed because of the paper size limitation of the output destination. | Specify the correct destination to evangelize the output paper. |
| "Paper size and blazon are mismatched. Select another tray from the following and press [Go on]. To cancel job, printing [Job Reset]. Paper size and blazon can also be changed in User Tools." | The paper tray loaded with paper of the size or type specified in the printer driver is non available. |
|
| "Parallel I/F board has a problem." | An error has occurred in the parallel interface. | Turn off the power of the machine, wait for 10 seconds or more after confirming that the main ability indicator is turned off, and so turn on the power. Turning On and Off the Power If the message persists even after you take turned the power off then on, consider repairing the machine. |
| "Printer font error." | At that place is a problem in the font file of the machine. | Consider repairing the machine. |
| "Print overrun." | A page image is discarded while printing the page. | Subtract [Resolution] in the printer driver. Applying Different Print Settings Depending on the Document Type |
| "Dial has been cancelled." | The Dial function was canceled because the staple position is specified incorrectly. | Bank check the orientation of the newspaper and print data, and the specified punch position. Punching Holes on Printed Pages |
| "Receiving information failed." | Transmission of data was canceled. | Transport the data over again. |
| "Sending data failed." | Transmission of information from the printer driver was canceled. | Check that the reckoner is operating normally. |
| "Staple error occurred. The job has been cancelled." | The number of sheets that can be stapled was exceeded, and press was canceled. | Bank check the number of sheets that can be stabled on the finisher in use. List of Specifications |
| "Staple has been cancelled." | The Staple function was canceled considering too many printed sheets were specified to exist stapled. | Check the specification of the finisher in use, and specify the setting accordingly.
|
| Incorrect finisher is specified in the printer driver. | Check the option configuration specified in the printer driver. The Option Configuration of the Machine Is Not Reflected in the Printer Driver | |
| A malfunction occurred temporarily on the auto. | Turn off the power of the motorcar, await for 10 seconds or more afterwards confirming that the main ability indicator is turned off, and then turn on the power. Turning On and Off the Power | |
| "The task was cancelled considering the specified settings are not applicative for Booklet." | A condition in which binding cannot be performed was specified, and printing was canceled. | Check the bounden condition. |
| "The print task has been cancelled because capture file(s) could not exist stored: Exceeded max. memory." | The amount of bachelor space on the hd became low while saving the capture data. |
|
| "The print job has been cancelled considering capture file(s) could not be stored: Exceeded max. number of files." | The number of documents stored in the automobile exceeded the maximum number while saving the capture information. | Erase documents that are no longer needed. Deleting Documents from Document Server |
| "The print chore has been cancelled because capture file(s) could not be stored: Exceeded max. number of pages per file." | The number of pages stored in the auto exceeded the maximum number while saving the capture data. |
|
| "The selected paper size is not supported. This task has been cancelled." | A paper size that cannot be fed on the machine was specified and printing was canceled past the auto job cancel function. | Print the document on paper of a size that can exist fed on the machine. |
| "The selected paper type is not supported. This job has been cancelled." | A newspaper blazon that cannot be fed on the machine was specified and press was canceled by the auto chore cancel function. | Print the document on newspaper of a type that tin exist fed on the machine. |
| "You lot exercise not have a privilege to use this function. This job has been cancelled." | Authentication information is non registered correctly in the printer driver. | Specify the authentication information in the printer driver. For the authentication information, consult the user administrator. Specifying Login Information in the Printer Driver |
| The user registered in the printer driver does non have permission to apply the printer role. | Consult the user administrator. The user administrator tin change the access permissions in the accost book. Confirming the Available Functions | |
| "Z-fold mistake." | A setting in which Z-fold cannot be performed was specified, and the Z-fold function was canceled. | Check the tray, paper orientation and print data orientation settings, and the specified position for post-processing. |
Source: http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001077/0001077458/view/trouble/int/message_printer.htm
Post a Comment for "Ndroid Printer Failed to Change the Seetings Try Again"